Trust natural ventilation

Natural ventilation system

Gravitational ventilation is a natural method of air exchange in rooms, which involves the use of the pressure difference caused by the difference in air temperature inside and outside the building. This process takes place without the use of a motor, and instead uses gravity and atmospheric pressure to bring fresh air into the building and remove stale air.

The gravity smoke extraction system is based on the use of special ventilation holes located on the roof of the building, which serve as air inlets and outlets. Inlets are usually located on the lower part of the roof and outlets on the upper part. This allows air to circulate freely between them, and excess moisture and heat is removed to the outside.

Our company offers high-quality fire protection solutions. We encourage you to contact us: Tel/fax.: +48 (32) 236 30 05 or learn more about the details of our smoke vents: https://www.gulajski.pl/systemy-oddymiania-klatek-schodowych/

In the case of fire protection systems, gravity ventilation can be used to ensure proper conditions inside the building during a fire. Vents must be properly designed to provide enough air to sustain the combustion process, but at the same time to avoid the spread of fire.

Learn more about gravity smoke ventilation:

Our company offers high-quality gravity smoke extraction systems for staircases. We encourage you to contact us: Tel/fax.: +48 (32) 236 30 05 or learn more about the details of our solutions related to smoke vents: https://www.gulajski.pl/systemy-oddymiania-klatek-schodowych/

A gravity ventilation system requires that the air inlets are located in the lower part of the building and the outlets in the upper part. Then, in the event of a fire, warm air rises upwards, which increases the outlet pressure and thus accelerates the natural ventilation process. Air intakes must be designed in such a way as to prevent flames, smoke and gases from entering the building.

Natural ventilation is one of the simplest and cheapest ways to maintain proper air quality inside buildings, and at the same time it can play an important role in fire protection systems, improving the safety of building users.

Natural ventilation for smoke extraction

Smoke dampers are elements of fire protection systems that enable natural gravitational ventilation in the event of a fire. These are special devices that are placed in the ventilation duct system, and their task is to protect rooms from smoke and toxic gases.

In the event of a fire, the smoke damper opens under the influence of the pressure difference between the inside of the building and the outside, which allows for quick and effective removal of smoke and exhaust gases. This device works on the gravitational principle, i.e. it uses the pressure difference caused by the difference in air temperature inside and outside the building.

During a fire, warm air rises upwards, causing an increase in pressure at the top of the building and a drop in pressure at the bottom. This allows outside air to flow into the building through the lower air inlets and smoke and flue gas are removed to the outside through the upper air outlets. These smoke extraction systems provide controlled airflow, thus increasing the effectiveness of natural ventilation and minimizing the risk of fire spreading.

An important element in gravity ventilation systems is also their design, which must be resistant to high temperatures and fire. Therefore, the materials used in the production of these elements must be resistant to high temperatures and radiant heat. In the event of a fire, the equipment is locked to protect the rooms from smoke and fire from entering other parts of the building.

It uses natural gravity ventilation to ensure the safety of building occupants in the event of a fire. The operation of these devices is based on the use of air pressure differences inside and outside the building, which enables quick removal of smoke and toxic gases and minimizes the risk of fire spreading.

Compared to electrically powered ventilation systems, natural smoke ventilation has many advantages in the event of a fire. First, it does not require an electrical supply, which means that the system will operate regardless of possible power failures. In the event of a fire, when power interruption is one of the most common problems, it is important that the smoke extraction system works independently.

Second, gravity ventilation is very effective at removing smoke and toxic gases because it uses natural physical forces, such as air pressure differences, to ensure a continuous flow of air inside and outside the building. This is especially important in the event of a fire, where rapid smoke and gas removal can save lives.

Finally, gravity ventilation is easy to install and maintain, as it does not require complex electrical control and power systems. As a result, the costs associated with its installation and maintenance are usually lower than in the case of other ventilation systems.

All these advantages make gravity ventilation a popular choice in smoke extraction systems in buildings. Thanks to their effectiveness, reliability and low costs, natural ventilation systems can increase the level of safety and minimize the risk of material losses in the event of a fire.

A non-return flap, also known as a non-return valve, is one of the components of gravity ventilation that is used to prevent air from flowing back in the opposite direction to its natural flow. This flap usually consists of a metal or plastic plate that sits against the vent and opens when air flows in one direction and closes when it tries to flow in the opposite direction.

Non-return flap for gravity ventilation

A check valve for gravity ventilation is a key element of the system that ensures the proper functioning of ventilation, especially in homes with a cooker hood. Its main task is to prevent the backflow of polluted air into the room, which is especially important in the kitchen, where fumes and odors are generated during cooking. You can order a non-return valve for gravity ventilation by phone: +48 32 777 11 44

Aspect	Description
Role in the System	A key element of the ventilation system, ensuring the proper functioning of ventilation.
Meaning	It prevents the backflow of polluted air into the room.
Key Application	Especially important in homes with a cooker hood, where fumes and odors are generated during cooking.
Main task	Keeping indoor air clean by preventing polluted air from returning.
Mounting location	Usually mounted at the outlet of the ventilation duct.
Mechanism of action	It opens automatically under the pressure of the air to be removed, it closes when the pressure drops.

The check valve is used in many elements of gravity ventilation, including:

• Air inlets and outlets – A check flap can be fitted to the air inlet or inlet to prevent air from flowing back, which can lead to leaks and obstruction of airflow.
• Ventilation ducts – non-return flaps are often placed inside the ventilation ducts to prevent air from flowing back between the duct sections.

SHEV systems – non-return flaps are also used in smoke extraction systems, where they provide one-way airflow, which is essential for effective smoke and exhaust gas removal in the event of a fire.

Summary

• Gravitational ventilation is one of the oldest and simplest ways to ensure air flow in a building. It is based on natural physical forces, such as differential pressure, temperature and humidity, which affect the airflow in a building.
• The main element of gravity ventilation are ventilation openings that allow air to flow between the inside of the building and the outside. However, to ensure effective and safe airflow, it is necessary to use appropriate ventilation elements, such as a non-return flap.
• A non-return flap is an element of gravity ventilation that prevents air from flowing back in the opposite direction to its natural flow. This is particularly important in the case of fire protection systems, where the effectiveness of smoke extraction is crucial for the safety of people and property.
• Non-return flaps are used in various elements of gravity ventilation, such as air inlets and outlets, ventilation ducts and smoke extraction systems. They prevent air from flowing back and minimize the risk of leaks, increasing the efficiency of the entire ventilation system.
• Gravitational ventilation works without the need for electric power, which increases the level of safety and effectiveness of the smoke extraction system. This makes it one of the most popular ventilation methods in low- and medium-height buildings.

To sum up, gravitational ventilation is an extremely important element of every building, which affects the comfort and safety of its users. A properly designed and installed gravity ventilation system will ensure effective and safe airflow, minimizing the risk of leaks and failure of the ventilation system.

You can order high-quality gravity ventilation systems from our company, please contact us: https://www.gulajski.pl/kontakt/

Autor: Tomasz Matuszek; Dział Marketingu - Firma Gulajski